Plumbing Inspection in Goodyear, AZ

When you call

We'll connect you with an independent local plumber who serves Goodyear. Tell them the address, roughly when the house was built, whether you're buying or own it, and any contract dates. Mention whether the house is on City of Goodyear water or Liberty Utilities, since that decides whose backflow and water quality rules apply.

What changes the price

• Number of bathrooms, fixtures and water heaters
• Adding a camera run of the sewer line
• Getting to the water heater, softener and main shutoff
• A written report for a lender or seller

Local conditions in Goodyear

Goodyear's homes are fairly new; census-based figures put the median build year at about 2007. Even so, water heaters and regulators from that era are getting older, and the water is hard on them. The City of Goodyear's report lists an average of 18 grains per gallon, ranging from 4 to 49, and suggests setting softeners between 14 and 20 grains for best results.

More than one water utility serves the city. Liberty Utilities supplies water, and in parts of town wastewater, to some neighborhoods; residents unsure of their provider can call the city at 623-882-7887.

On City of Goodyear water, containment backflow assemblies must be tested when installed and every year after by a certified tester registered in the city's portal, and the city sends reminders.

One rule that surprises people: Goodyear requires a city permit to replace a residential water heater. Southwest Gas serves the city, so if you ever smell gas, leave first, then call 911 and Southwest Gas at 877-860-6020.

Liberty-served homes follow Liberty's rules instead: where backflow prevention is required at the meter, Liberty wants the device tested at first and yearly by an AWWA certified tester. In either service area, the plumber will check the water heater's relief valve and drain pan, pressure at a hose bib, and the shutoffs under each sink and toilet. Ask for photos of anything that needs attention.

Short checklist

• Find the water heater's age on its label
• Note the softener setting, if there is one
• Locate the backflow device and any test record
• Clear access to cleanouts and the main shutoff